Water heat exchangers

Product information:

Convector without fan, assy.FR041 

This passive convector is suitable with all the following liquid heaters:

• AUTOTERM Flow 5D/5B
• AUTOTERM Flow 14D

Heating capacity: 1.2 kW

Inlet & outlet for ethylene glycol: ø16 mm

Length: 1 meter

Weight: 3.35 kg

Manufacturer: Veldo Teknoloji

Product information:

Convector without fan, assy.FR043 

This passive convector is suitable with all the following liquid heaters:

• AUTOTERM Flow 5D/5B
• AUTOTERM Flow 14D

Heating capacity: 1.3 kW

Inlet & outlet for ethylene glycol: ø16 mm

Length: 1.5 meter

Weight: 5.15 kg

Manufacturer: Veldo Teknoloji

Product information:

Convector with fan, assy.FR044

This convector with the fan is suitable with all the following liquid heaters:

• AUTOTERM Flow 5D/5B
• AUTOTERM Flow 14D

Voltage: 12V

Current consumption: 0.3 A

Air Flow: 60 m3/h

Heating capacity: 1.6 kW

Inlet & outlet for ethylene glycol: ø16 mm

Length: 1 meter

Weight: 3.55 kg

Manufacturer: Veldo Teknoloji

Product information:

Voltage: 12V

Nominal air flow: 303 m3/h

This heat exchanger has a 3-speed fan

Heating capacity, Ethylene glycol: 5.35 kW

4 x ø60 mm air sleeves for even hot air distribution

Inlet & outlet for ethylene glycol: ø16 mm

Maximum allowable inner temperature °C: 100

Maximum reachable inner temperature with AUTOTERM Flow series heater °C: 88

For fan speed control optional 4 position rotary switch FR018 is required.

Water heat exchanger with the fan is suitable for all the following liquid heaters:

• AUTOTERM Flow 5 D / B
• AUTOTERM Flow 14D

Manufacturer: SIROCO

Product information:

Voltage: 24V

Nominal air flow: 303 m3/h

This heat exchanger has a 3-speed fan

Heating capacity, Ethylene glycol: 5.35 kW

4 x ø60 mm air sleeves for even hot air distribution

Inlet & outlet for ethylene glycol: ø16 mm

Maximum allowable inner temperature °C: 100

Maximum reachable inner temperature with AUTOTERM Flow series heater °C: 88

For fan speed control optional 4 position rotary switch FR018 is required.

Water heat exchanger with the fan is suitable for all the following liquid heaters:

• AUTOTERM Flow 5 D / B
• AUTOTERM Flow 14D

Manufacturer: SIROCO

Product information:

Voltage: 12V

Nominal air flow: 700 m3/h

This heat exchanger has a 3-speed fan

Heating capacity, Ethylene glycol: 11.9 kW

4 x ø60 mm air sleeves for even hot air distribution

Inlet & outlet for ethylene glycol: ø16 mm

Maximum allowable inner temperature °C: 100

Maximum reachable inner temperature with AUTOTERM Flow series heater °C: 88

For fan speed control optional 4 position rotary switch FR018 is required.

Water heat exchanger with the fan is suitable for all the following liquid heaters:

• AUTOTERM Flow 5 D / B
• AUTOTERM Flow 14D

Manufacturer: SIROCO

Product information:

Voltage: 24V

Nominal air flow: 350 m3/h

This heat exchanger has a 3-speed fan

Heating capacity, Ethylene glycol: 6.4 kW

4 x ø60 mm air sleeves for even hot air distribution

Inlet & outlet for ethylene glycol: ø16 mm

Maximum allowable inner temperature °C: 100

Maximum reachable inner temperature with AUTOTERM Flow series heater °C: 88

For fan speed control optional 4 position rotary switch FR018 is required.

Water heat exchanger with the fan is suitable for all the following liquid heaters:

• AUTOTERM Flow 5 D / B
• AUTOTERM Flow 14D

Manufacturer: SIROCO

Product information:

Voltage: 12V

Nominal air flow: 250 m3/h

This heat exchanger has a 2-speed fan

Heating capacity, Ethylene glycol: 3.14 kW

Inlet & outlet for ethylene glycol: ø16 mm

Maximum allowable inner temperature °C: 100

Maximum reachable inner temperature with AUTOTERM Flow series heater °C: 88

For fan speed control optional 4 position rotary switch FR018 is required.

Water heat exchanger with the fan is suitable for all the following liquid heaters:

• AUTOTERM Flow 5 D / B
• AUTOTERM Flow 14D

Manufacturer: SIROCO

Product information:

Voltage: 12V

Nominal air flow: 236 m3/h

This heat exchanger has a 2-speed fan

Heating capacity, Ethylene glycol: 3.05 kW

Equipped with 2 adjustable air diffusers with 3 closable flaps

Inlet & outlet for ethylene glycol: ø16 mm

Maximum allowable inner temperature °C: 100

Maximum reachable inner temperature with AUTOTERM Flow series heater °C: 88

Power supply connector not included.

For fan speed control optional 4 position rotary switch FR018 is required.

Water heat exchanger with the fan is suitable for all the following liquid heaters:

• AUTOTERM Flow 5 D / B
• AUTOTERM Flow 14D

Manufacturer: SIROCO

Product information:

Voltage: 12V

Nominal air flow: 314 m3/h

This heat exchanger has a 3-speed fan

Heating capacity, Ethylene glycol: 6.05 kW

3 x ø60 mm air sleeves for even hot air distribution

Inlet & outlet for ethylene glycol: ø16 mm

Maximum allowable inner temperature °C: 100

Maximum reachable inner temperature with AUTOTERM Flow series heater °C: 88

For fan speed control optional 4 position rotary switch FR018 is required.

Water heat exchanger with the fan is suitable for all the following liquid heaters:

• AUTOTERM Flow 5 D / B
• AUTOTERM Flow 14D

Manufacturer: SIROCO

Product information:

Voltage: 24V

Nominal air flow: 314 m3/h

This heat exchanger has a 2-speed fan

Heating capacity, Ethylene glycol: 6.05 kW

3 x ø60 mm air sleeves for even hot air distribution

Inlet & outlet for ethylene glycol: ø16 mm

Maximum allowable inner temperature °C: 100

Maximum reachable inner temperature with AUTOTERM Flow series heater °C: 88

For fan speed control optional 4 position rotary switch FR018 is required.

Water heat exchanger with the fan is suitable for all the following liquid heaters:

• AUTOTERM Flow 5 D / B
• AUTOTERM Flow 14D

Manufacturer: SIROCO

Product information:

Voltage: 24V

Nominal air flow: 347 m3/h

This heat exchanger has a 3-speed fan

Heating capacity, Ethylene glycol: 5.9 kW

Inlet & outlet for ethylene glycol: ø16 mm

Front panel of water heat exchanger is heat resistant & removable

Maximum allowable inner temperature °C: 100

Maximum reachable inner temperature with AUTOTERM Flow series heater °C: 88

Water heat exchanger with the fan is suitable for all the following liquid heaters:

• AUTOTERM Flow 5 D / B
• AUTOTERM Flow 14D

Manufacturer: SIROCO

Product information:

Convector with fan, assy.FR042

This convector with the fan is suitable with all the following liquid heaters:

• AUTOTERM Flow 5D/5B
• AUTOTERM Flow 14D

Voltage: 12V

Current consumption: 0.3 A

Air Flow: 60 m3/h

Heating capacity: 1.4 kW

Inlet & outlet for ethylene glycol: ø16 mm

Length: 1 meter

Weight: 3.55 kg

Manufacturer: Veldo Teknoloji

Product information:

Voltage: 12V

Low noise fan

Nominal air flow: 110 m3/h

This heat exchanger has a 1-speed fan

Heating capacity, Ethylene glycol: 2.75 kW

Inlet & outlet for ethylene glycol: ø16 mm

Front panel of water heat exchanger is heat resistant & removable

Maximum allowable inner temperature °C: 100

Maximum reachable inner temperature with AUTOTERM Flow series heater °C: 88

Water heat exchanger with the fan is suitable for all the following liquid heaters:

• AUTOTERM Flow 5 D / B
• AUTOTERM Flow 14D

Manufacturer: SIROCO

*Pictures shown are for illustration purposes only. Actual product may vary in colour.

Product information:

Voltage: 24V

Low noise fan

Nominal air flow: 110 m3/h

This heat exchanger has a 1-speed fan

Heating capacity, Ethylene glycol: 2.75 kW

Inlet & outlet for ethylene glycol: ø16 mm

Front panel of water heat exchanger is heat resistant & removable

Maximum allowable inner temperature °C: 100

Maximum reachable inner temperature with AUTOTERM Flow series heater °C: 88

Water heat exchanger with the fan is suitable for all the following liquid heaters:

• AUTOTERM Flow 5 D / B
• AUTOTERM Flow 14D

Manufacturer: SIROCO

Product information:

Voltage: 12V

Nominal air flow: 347 m3/h

This heat exchanger has a 3-speed fan

Heating capacity, Ethylene glycol: 5.9 kW

Inlet & outlet for ethylene glycol: ø16 mm

Front panel of water heat exchanger is heat resistant & removable

Maximum allowable inner temperature °C: 100

Maximum reachable inner temperature with AUTOTERM Flow series heater °C: 88

Water heat exchanger with the fan is suitable for all the following liquid heaters:

• AUTOTERM Flow 5 D / B
• AUTOTERM Flow 14D

Manufacturer: SIROCO

Product information:

Voltage: 12V

Nominal air flow: 220 m3/h

This heat exchanger has a 3-speed fan

Heating capacity, Ethylene glycol: 4.9 kW

Equipped with 3 adjustable air diffusers with grid

Inlet & outlet for ethylene glycol: ø16 mm

Maximum allowable inner temperature °C: 100

Maximum reachable inner temperature with AUTOTERM Flow series heater °C: 88

For fan speed control optional 4 position rotary switch FR018 is required.

Compact water heat exchanger with the fan is suitable for all the following liquid heaters:

• AUTOTERM Flow 5 D / B
• AUTOTERM Flow 14D

Manufacturer: SIROCO

Product information:

Voltage: 12V

Nominal air flow: 314 m3/h

This heat exchanger has a 2-speed fan

Heating capacity, Ethylene glycol: 6.05 kW

3 x ø60 mm air sleeves for even hot air distribution

Inlet & outlet for ethylene glycol: ø16 mm

Maximum allowable inner temperature °C: 100

Maximum reachable inner temperature with AUTOTERM Flow series heater °C: 88

For fan speed control optional 4 position rotary switch FR018 is required.

Water heat exchanger with the fan is suitable for all the following liquid heaters:

• AUTOTERM Flow 5 D / B
• AUTOTERM Flow 14D

Manufacturer: SIROCO

Product information:

Voltage: 12V

Nominal air flow: 700 m3/h

This heat exchanger has a 3-speed fan

Heating capacity, Ethylene glycol: 11.9 kW

Inlet & outlet for ethylene glycol: ø16 mm

Maximum allowable inner temperature °C: 100

Maximum reachable inner temperature with AUTOTERM Flow series heater °C: 88

For fan speed control optional 4 position rotary switch FR018 is required.

Water heat exchanger with the fan is suitable for all the following liquid heaters:

• AUTOTERM Flow 5 D / B
• AUTOTERM Flow 14D

Manufacturer: SIROCO

Product information:

Voltage: 12V

Nominal air flow: 350 m3/h

This heat exchanger has a 3-speed fan

Heating capacity, Ethylene glycol: 6.4 kW

4 x ø60 mm air sleeves for even hot air distribution

Inlet & outlet for ethylene glycol: ø16 mm

Maximum allowable inner temperature °C: 100

Maximum reachable inner temperature with AUTOTERM Flow series heater °C: 88

For fan speed control optional 4 position rotary switch FR018 is required.

Water heat exchanger with the fan is suitable for all the following liquid heaters:

• AUTOTERM Flow 5 D / B
• AUTOTERM Flow 14D

Manufacturer: SIROCO

Product information:

This passive water heat exchanger is suitable for all the following liquid heaters:

• AUTOTERM Flow 5D / 5B
• AUTOTERM Flow 14D

Heating capacity: 10 kW

Maximum allowable pressure PS bar: 31

Maximum allowable temperature TS °C: 220

Minimum allowable temperature TS °C: -196

Inner diameter: Ø 1.27 cm (1/2 in)

Manufacturer: Eko Air

Dimensions:

240 x 90 x 55 mm