COMFORT CONTROL
Our air & liquid heaters have a new control panel that will help to control your Autoterm heater more conveniently and most easily.
This control panel is suitable for the following heaters:
Air heaters:
Liquid heaters:
The PU-27 has an OLED screen that does not freeze at low temperatures and has an integrated temperature sensor.
To connect the control panel to older heater version 14TC-mini it is necessary to buy additional adapter wiring assy.3795
Dimensions: 60 x 51 x 12 mm
詳しくはControl panel PU-5, assy.3765 (a.k.a 3520)
This control panel is suitable with all PLANAR air heaters 12V and 24V.
“Power mode”
(If the external sensor is not connected) |
|
** “Temperature mode” (If the external sensor is connected) |
|
* “Ventilation mode”
|
|
** “Ventilation during heating” - function (If the external sensor is connected) |
|
Dimensions: 50 x 36 x 18 mm
Modem QSTART is device with the ability to use Autoterm Control application on smartphone (available at Google Play and AppStore) to control any AUTOTERM air heater and liquid heaters.
Application "Autoterm Control" together with modem QSTART will let you to operate and oversee your Autoterm heater via GSM / LTE network.
Main advantages of "Autoterm Control" application:
* Modem QSTART uses micro sim card slot
To increase wiring length from modem QSTART till control panel a 2.6 meter extension wiring for control panels (assy.4269) can be used.
** Please note, For Modem QSTART to be connected to AUTOTERM Air series heater a 1.8 meter control panel wire (assy.2067) must be used.
Wiring length from heater to modem must not exceed 2 meters.
*** Please note, Modem QSTART will not work if heater is equipped with control panel PU-22.
For modem QSTART to work, control panel of the heater must be changed to control panel PU-5, PU-27 or Comfort Control.
詳しくは
Control panel PU-5, assy.3765 (a.k.a 3520)
This control panel is suitable with all PLANAR air heaters 12V and 24V.
“Power mode”
(If the external sensor is not connected) |
|
** “Temperature mode” (If the external sensor is connected) |
|
* “Ventilation mode”
|
|
** “Ventilation during heating” - function (If the external sensor is connected) |
|
Dimensions: 50 x 36 x 18 mm
This control panel is suitable for the following heaters:
Air heaters:
Liquid heaters:
The PU-27 has an OLED screen that does not freeze at low temperatures and has an integrated temperature sensor.
To connect the control panel to older heater version 14TC-mini it is necessary to buy additional adapter wiring assy.3795
Dimensions: 60 x 51 x 12 mm
詳しくはCOMFORT CONTROL
Our air & liquid heaters have a new control panel that will help to control your Autoterm heater more conveniently and most easily.
Modem QSTART is device with the ability to use Autoterm Control application on smartphone (available at Google Play and AppStore) to control any AUTOTERM air heater and liquid heaters.
Application "Autoterm Control" together with modem QSTART will let you to operate and oversee your Autoterm heater via GSM / LTE network.
Main advantages of "Autoterm Control" application:
* Modem QSTART uses micro sim card slot
To increase wiring length from modem QSTART till control panel a 2.6 meter extension wiring for control panels (assy.4269) can be used.
** Please note, For Modem QSTART to be connected to AUTOTERM Air series heater a 1.8 meter control panel wire (assy.2067) must be used.
Wiring length from heater to modem must not exceed 2 meters.
*** Please note, Modem QSTART will not work if heater is equipped with control panel PU-22.
For modem QSTART to work, control panel of the heater must be changed to control panel PU-5, PU-27 or Comfort Control.
詳しくは